Frequently Asked Questions
Bathtub refinishing, bathtub resurfacing, bathtub reglazing, and bathtub painting are all terms to describe the applying of a durable new finish coat to an existing tub.
The coating that we use is a 3 part aliphatic acrylic polyurethane that has
– durable finish
– Mold resistant
– Resistance to abrasion and scratching (holds up to normal wear and tear)
– Impact resistance
– Resistance to extreme temperatures
– Color retention (won’t yellow like epoxy coatings)
– Super high Gloss
No!! Absolutely not! Different bathroom reglazing nyc companies use different products and procedures, and the results, of course are not the same. Some will paint a bathtub with a marine paint or epoxies. Some use other industrial coatings that are not engineered specifically for resurfacing bathtubs. Supreme Bath uses only state of the art, specially designed equipment which reduces over spray to as close to zero as possible, and we have equipment that allows us to take the steps needed to not only make the work environment safe but allows for our process to be done with no mess, or odor or damage which could result from over spray or paint mist. Our materials at our bathtub reglazing Brooklyn location are specifically engineered for resurfacing bathtubs. With the Supreme Bath Refinishing process, bathtubs and more can be reglazed with no or little disruption to the occupants of the home
a. Cleaning a bathtub with our special bathtub restoration ny cleaners makes the surface perfectly clean. If the surface been refinished before we strip old glaze prior to cleaning it.
b. After cleaning, etching is required to make the surface stickier for a top coat.
c. When bathtub is etched, it needs to get dry. We dry the surface with our hot air compressor.
d. Time to fix and fill big chips and cracks. Almost all damages can be fixed to a 100% invisibility.
e. Now we are ready to mask the surface that we don’t want to be sprayed. All except the fixture that needs to be refinished will be covered with the masking paper and plastic cover.
f. Now we are ready for saline bonding agent that helps a primer to stick to the surface better. We wipe the surface saline before priming.
g. After 2 coats of primer is applied to the surface, we have to wait 10 minutes before applying our final top coat.
h. Before a top coat is applied we put a non-skid surface on the base of the bathtub if it is required by a customer.
i. Finally, ready for a top coat. 3 coats of acrylic polyurethane is applied to achieve super gloss and durable finish.
Normally between 3 to 4 hours, depending on the condition of the surface. If the bathtub was refinished before then we will have to strip old paint and it will add an extra hour to the process.
When our technician leaves your place, you can use your fixture in 12 hours.
If proper care is taken and cleaning procedures followed, your newly refinished item will last for 10-15 years.
We do provide 3-5 years of warranty on all our projects!
NO, it is as durable if not stronger than the original surface. Whether or not any surface will chip is dependent on the angle at which the dropped item hit’s the surface. A glass bottle can be dropped and not chip a surface, however, a plastic bottle can be dropped on the same surface and chip it.
You have to be professional bathtub refinisher in order to identify if your fixture was refinished. Since our coating imitates original surface, it will look brad new!
No more than a new acrylic tub, but if you want an extra protection against slipping, ask about our non-slip finish which is available at an extra cost.
Bathtub Non-Slip Anti-Slip Solutions – Bathtub non-slip can be added to any bathtub surface as a stand-alone solution or built in to our bathtub refinishing coating services. Provides a safe and secure feeling. Our bathtub anti-slip services do not have any sharp grit and provide comfort while bathing or getting in or out of your bathtub.
And you will feel more secure!
If you need recaulking, please inform us while making an appointment that you are interested in our bathroom caulking brooklyn or nyc bathroom caulking services.
Please go to our Colors Section
The main reason that most customers resurface their tile is to change the color. Many bathrooms have tile that is in good shape, but the color is out-of-date. They are tired of having to decorate around old colors like pink, peach, green, and yellow. At Supreme Bath Refinishing, we apply a new finish over the existing tile. The color is changed without having to go through the time and expense of replacement. You will get a new finish that will look like new tile. The new finish is strong and durable enough to last for many years.
The new finish is applied as a liquid and covers the grout lines as well. The result is that the grout will be the same color as the tile. Because the grout is so porous, you will have the definition of grout – so it will still have the look of a tile bathroom. Anyone walking into your bathroom will think that you have new tile in your bathroom. A secondary benefit of resurfacing is that the grout will be sealed off. This means that mold and mildew will have a tougher time getting a foothold. The result is that the tile is much easier to keep clean.
Put your countertops in a higher level with Supreme Bath Refinishing’s revolutionary Countertop Resurfacing – without breaking the bank. Using our Imitation Stone Finish coatings we’ll transform your kitchen or bathroom countertops at a fraction of the cost of Real Stone. No inconvenience, mess or hassle, either. Bath and Kitchen Countertop Resurfacing has never been so easy – your surfaces will be ready to use in just one day!
Sink refinishing brooklyn is a process of repairing and restoring an existing kitchen counter or bathroom vanity to extend its functional life, without replacement. The process involves the application of a very hard and durable acrylic coating to the existing counter. Countertop refinishing works equally well on kitchen countertops, bathroom vanities, laminate breakfast bars, and even cultured marble sink vanities.
The main reason that most customers resurface their countertops is to change the color. Many kitchens have countertops that are in good shape, but the color is out of date. They are tired of having to decorate around old outdated colors.
At Supreme Bath Refinishing, we apply a new finish over the existing countertop. The color is changed without having to go through the time and expense of replacement. You will get a new finish that will look like a new countertop. The new finish is strong and durable enough to last for many years.
Check out our colors section.
Yes, please go to our Care and Maintenance section!
The coatings that we now use are low VOC and environmentally friendly. Solvents have been dramatically reduced. The new lower VOC’s compounds result in a significantly lower smell that dissipates much quicker than older technology – without sacrificing any of the strength and durability our work is known for.
No. They do have some odors but it is not fumes which is dangerous. And we do ventilate the room to get rid of pain odors!
Like everything else, you get what you pay for. Cheaper prices mean some shortcuts have been taken and or a cheaper material is being used. They also probably don’t have the specialized equipment needed to do the refinishing process correctly.
We take pride in that we make no compromises on materials, procedure or equipment. This may cost a few dollars more, but the final product will be something you and we can be proud of and be happy and confident with for many years.
If your bathtub does not have any major damages and was not glazed before, then bathtub restoration nyc is the right choice of service for you. With this new technique we can restore your worn out and dull bathtub to its original new look. It is 99% odorless, no dust and lifetime warranty. Note: bathtub color cannot be changed with no spray restoration since we putting back in life your old original bathtub, but if you want to change the color you can go with our traditional spray system!
Yes we can! Had a bad experience with your bathtub liner. Is it cracked? Water trapped on the bottom? Bad smell? Doesn’t shine? Worn Out? Now you are convinced that Liners do not last as much long as advertised. We can help! Remove the liner and refinish a bathtub.
Using the latest technology we put a bathtub stopper on your old existing drain and change overflow cap. This process will save you on hiring a plumbing service and there is no risk of breaking old pipes while replacing a bathtub drain. Got to our Services section for information
Try to make empty the service area. Make sure that the faucets are dry. If there is a problem like water dripping or so, it needs to be taken care of before we arrive.
You should wait until you have completed all your construction work.
Usually it takes up 5-7 days to come to your place after you call us. It depends on the size of the project
All major credit cards are accepted. Certified check and money order are welcome too.
No, whatever price was set while making an appointment will be paid upon the completion of the project!